Rtu with display for the water network monitoring

AQUALOG Monitor is a new generation compact RTU designed for monitoring of the water distribution systems. 

It allows to monitor flow, pressure, temperature sensors, meters and level probes for water quality. AQUALOG Monitor can also be used where you do not have EE, being powered by internal battery and designed to operate in a very low power consumption. 

  • Low power, at least 5 years autonomy
  • “Discovery” Mode for detection and description of “Water Hammer” events thanks to high frequency virtual logger 
  • Water leakage pre-localization 
  • Connection to parametric probes for water qualitative analysis 
  • IoT via LoRaWAN Modem 
  • Connection to the control center via GSM/ GPRS/3G or radio frequency (real-time connection only via optional external power supply) 
  • Local visualization via multi-function display 
Designed and assembled in Italy
Download brochure for the integrated service
Power

Battery lifetime > 5 years in standard mode
Optional external supply

Certification

CE

Environmental Conditions

-25°C + 60°C

Case

IP67

Datasheet

PRESSURE

2 inputs from pressure cells

LEVEL

1 input from sensor piezo resistive (pressure/level)

TEMPERATURE

1 input PT1000

INSTRUMENTS

3 inputs 0-10 V / 4-20 mA

COUNTERS/ IMPULSE METERS

2 counter inputs up to 200 Hz

SIGNALS

1 LoRaWAN IoT modem
1 modem GSM / GPRS / 3G embedded
1 radio modem embedded (up to 5 km) – Mod. RF01
1 RS232
1 RS485
1 IR (optic)

COMMUNICATION

Battery lifetime > 5 years in standard mode
Optional external supply

POWER SUPPLY

-25°C + 60°C

ENVIRONMENTAL CONDITIONS

Integrated display: 2 x 20 Alfanumeric, 5 Keys

HMI

IP67

CERTIFICATION

 CE

 

Functionalities

DATA ACQUISITION

Base Time Acquisition: 1”
Base Time Storage: 1’ - 1 h
Max. Acquisition Variables Num.: 10
Samples Max Num.: Average value 500 days - 4 values/hour

REAL TIME SUPERVISION

IoT - Cloud technology via LoRaWAN
“Always on” applications with external power supply 
Step by step investigation

“DISCOVERY” MODE HIGH FREQUENCY DATA ACQUISITION
(FOR “WATER HAMMER” INVESTIGATIONS)

High frequency acquisition software module for sampling up 125 times per second. The storage is activated to the detection of the “Water Hammer” that is sampled for 25 seconds deepness.
You can be stored on the device up to 100 “Water Hammers”.

The data can be saved in CSV format. (The use of this feature reduces the battery lifetime).

COUNTERS

Max Nr. 2 - Range: 32 bit Conversion to engineering units

PROTOCOLS AND STANDARDS FOR REMOTE COMMUNICATION

Modbus RTU / IEC 60870-5-101 / LoRaWAN

MESSAGES

SMS

ALARMS

Signalling and managing of alarms and events generated by threshold overcoming / reaching of both physical and logical states.
Messages service for the alarms notification.

OPC

Compliant by OPC SERVER

CONFIGURATION

From pc using Fast software “Rainbow Configurator”

INTEGRATION WITH AQUAWORKS, OVERLAND AND SCADA Siemens WINCC-OA

Direct by Wizard