Compact RTU for pressure and flow monitoring

AQUALOG PQ is a RTU designed to operate in rugged environments and is particularly suitable for the water networks monitoring.

It allows to monitor pressures, flows and levels in environments where it is difficult to operate and there is not availability of electricity. AQUALOG PQ, battery powered, is designed to operate in a very low power consumption. AQUALOG PQ is a sensor with LoRaWAN Communication.

  • Low power, at least 6 years autonomy
  • IP68 case
  • “Discovery” Mode for detection and description of “Water Hammer” events thanks to high frequency virtual logger
  • Data acquisition and trasmission from critical point (RTCP System)
  • Flood prevention with level measurement rainfall
  • IoT via LoRaWAN Modem
  • Connection to the control center via GSM/GPRS/3G
Designed and assembled in Italy
Download brochure for the integrated service
Power

Battery lifetime > 6 years in standard mode

Certification

CE

Environmental Conditions

-25°C + 60°C

Case

IP68

Datasheet

                                                                                                                                             

PRESSURE/LEVEL

2 inputs from pressure/level/ultrasonic level 0-10 mt

FLOW/DI

1-2 counter inputs from Flow Meter (max 100 Hz) or general purpose DI

COMMUNICATION

1 LoRaWAN IoT modem
1 modem GSM / GPRS / 3G embedded with external antenna - optional carriageable antenna
1 radio modem embedded (optional)
1 USB Port

POWER SUPPLY

Battery lifetime > 6 years in standard mode

ENVIRONMENTAL CONDITIONS

-25°C + 60°C

CASE

IP68

SIZE

PQ 80x175x60 mm – PQ PLUS 130x200x90

CERTIFICATION

CE
Functionalities

                                                                                                                                             

DATA ACQUISITION

Base Time Acquisition: 1”
Base Time Storage: 1’ - 1 h
Max. Acquisition Variables Num.: 16 Samples Max Num.: 250000

REAL TIME SUPERVISION

IoT - Cloud technology via LoRaWAN
“Always on” applications with external power supply
Step by step investigation

“DISCOVERY” MODE HIGH FREQUENCY DATA ACQUISITION
(FOR “WATER HAMMER” INVESTIGATIONS)

High frequency acquisition software module for sampling up 125 times per second. The storage is activated to the detection of the “Water Hammer” that is sampled for 25 seconds deepness.
You can be stored on the device up to 100 “Water Hammers”.

The data can be saved in CSV format. (The use of this feature reduces the battery lifetime).

COUNTERS

Nr. 1 - Range: 32 bit
Conversion to engineering units

PROTOCOLS AND STANDARDS FOR REMOTE COMMUNICATION

Modbus RTU / IEC 60870 / LoRaWAN / FTP

MESSAGES

SMS

ALARMS

Signalling and managing of alarms and events generated by threshold overcoming / reaching of both physical and logical states.
Messages service for the alarms notification.

OPC

Compliant by OPC server

CONFIGURATION

From pc using Fast software “Rainbow Configurator”

INTEGRATION WITH AQUAWORKS, OVERLAND AND SCADA Siemens WINCC-OA

Direct by Wizard